ISO 17025 accredited calibration laboratory +49 7245 80475-0 info@inotech.eu
Home/Products/Electricity meter test system

Electricity meter test system

Single- and three-phase test benches, reference instruments and power amplifiers to IEC and ANSI – from inotech Spain Meter Calibration Systems S.L. in Barcelona, with system integration and service from a single source.

Three-phase electricity meter test bench with reference cabinet
POWER
up to 4,000 VA
MEASUREMENT UNCERTAINTY
≤ 0.02 %
TEST POSITIONS
1 – 60
STANDARDS
IEC & ANSI

What the system delivers

The test benches generate current and voltage via electronic power amplifiers and compare the meter pulses with a class 0.02 reference meter. Single- and three-phase meters, transformer-operated meters and combination meters are tested on the same platform.

Test sequences to IEC 62052/62053 and ANSI C12 are pre-configured, as are communication tests for smart meters including DLMS. The electricity meter test systems come from inotech Spain Meter Calibration Systems S.L. in Barcelona, which is responsible for electricity within the inotech group – with one point of contact for all energy types.

The systems are used by meter manufacturers, network operators, metrology authorities and calibration laboratories.

Scope of supply
Test bench with meter holders and contacting
Reference meter and power amplifiers
Voltage and current sources with phase control
Test software with IEC and ANSI standard test sequences
Commissioning, calibration and operator training
Electricity meter test bench with reference cabinet
TEST BENCH WITH REFERENCE CABINET
Metrology detail at the test position
METROLOGY DETAIL AT THE TEST POSITION

Electrical metrology with inotech system integration

Reference class 0.02

Measurement uncertainty down to ≤ 0.02 % across the entire load and phase range.

IEC and ANSI

Test sequences to IEC 62052/62053 and ANSI C12 pre-configured.

Single- and three-phase

Direct-connected, transformer-operated and combination meters on one platform.

Smart meter tests

Communication and parameterisation tests including DLMS encryption.

Scalable

From the laboratory version to series test benches with up to 60 test positions.

Single source

Test technology and service from inotech Spain – one point of contact for gas, water, heat and electricity.

Technical specification

VALUES DEPEND ON CONFIGURATION · BINDING IN THE PROJECT DATA SHEET
Test power
up to 4,000 VA
Measurement uncertainty
≤ 0.02 % (class 0.02 reference meter)
Voltage range
3 x 30 V to 3 x 480 V
Current range
1 mA to 120 A, higher currents optional
Test positions
1 to 60
Meter types
Single- and three-phase direct, transformer-operated and combination meters
Standards
IEC 62052, IEC 62053, ANSI C12
Communication
DLMS, optical interface, manufacturer-specific protocols
Origin
inotech Spain Meter Calibration Systems S.L., Barcelona · reference systems through the ZERA Group since 2026
Interfaces
ERP/MES integration, network, database and CSV export
Documentation
Test reports, calibration certificates, ISO 17025-capable traceability

Configuration and expansion

Transformer testing

Addition of test equipment for current and voltage transformers.

Climatic testing

Testing at defined ambient temperatures for type tests.

Automated handling

Feeding and contacting of meters without operator intervention.

Retrofit

Modernisation of existing test benches to current reference technology.

Do you have specific technical requirements?

Send us your specification – meter types, flow ranges, number of test positions and the required degree of automation.